Lightolier PRISTINE T2 Installation Instructions

PRISTINE T2 Task Lighting
™

Installation Instructions

1
Find the center and mark holes as indicated. Drive screws into binder bin
or shelf with shoulder washers. (Do not over drive screws)
.149" diameter
#25 drill

WARNING:

To Prevent Risk
of Electrical Shock . . .
12"
6"
1
9 / "
4
from the back edge
1 All electrical installations must be done by
qualified personnel in accordance with codes
regulations applicable at the installation site.
2 Before beginning work, ensure that electrical
power has been removed from the circuits that
are being connected to or disconnected from.
45 Industrial Way
Wilmington, MA 01887
2
Position the light's keyhole slots over the screws, shift right to engage.
keyhole

For Dimming Units Only:

• Press and release button
for on/off.
• Press and hold to dim.
• Release to set dimming level.
3 Ensure that circuits to which the lights are connected
are properly grounded and are the correct voltage.
4 To prevent wiring damage or abrasion, do not expose
wiring to edges of sheet metal or other sharp objects.
939504881 Rev B