Table of Contents
Advertisement
Programme Timers
No Channel Name
Start
1.
ITV 1
20:00 21:00 12/05/2005
2.
BBC ONE
00:00 00:00 01/01/2005
3.
BBC ONE
00:00 00:00 01/01/2005
4.
BBC ONE
00:00 00:00 01/01/2005
5.
BBC ONE
00:00 00:00 01/01/2005
6.
BBC ONE
00:00 00:00 01/01/2005
Exit
Move/Change
MENU
• To set an event, highlight its mode button using
buttons and press "SELECT" button to display the
timer entry window.
Type:
Name:
Start:
End:
Date:
Mode:
• Here the six settings of channel type, channel name,
start time, end time, date and frequency mode can be
set. You can move freely between each setting using
or
buttons.
• The channel type is set using
enables displaying only the selected type channels.
• The channel name is set using
display the channel which broadcasts the programme.
• The start time, end time and date are each set with
the number buttons on the remote control in 24-hour
format.
• The frequency mode determines how often the re-
ceiver operates this event and is set with the
buttons to be either Once, Daily, or Weekly.
Hint
If an invalid number for the start or end times
or the date is entered, "Entered time is not
valid" message appears on the menu.
TV Setup
To be able to go through TV functions, you can use
this item.
The digital TV Setup menu screen is accessed from
the Main Menu. Press the "M" button to display the
Main Menu and use
Setup". Press "SELECT" button to display TV Setup
menu screen.
End
Date
Mode
Active
Inactive
Inactive
Inactive
Inactive
Inactive
04/07/2005
Edit Timer
i
OK
TV
3. ITV
00:00
00:00
03/06/2005
Once
or
buttons. It
or
buttons to
or
buttons to highlight "TV
Main Menu
10:42
More
or
Detailed information for all menu items is in Analogue
TV Menu System section.
Common Interface
• Press "M" button to display the Main Menu and use
the
or
Interface" line and press "SELECT" button.
Main Menu
It is required to subscribe to a pay channel company
to view the pay channels of the Digital Terrestrial broad-
casting. Obtain the Conditional Access Module (CAM)
and the Viewing card by subscribing to a pay chan-
or
nel company, then insert those to the Television using
the following procedure.
1. Switch off the TV and unplug from the mains.
2. Insert the CAM, then Viewing Card to the
slot that is located in the terminal cover at the
left-hand side of the TV (from front view).
• The CAM should be correctly inserted, it is impos-
sible to insert fully if reversed. The CAM or the TV
terminal may be damaged if the CAM is forcefully
inserted.
3. Connect the TV to the mains supply, switch
on and then wait for few moments until the
card is activated.
• Some CAMs may require the following set up. Please
set the CAM by entering the IDTV menu, Common
Interface then pressing "SELECT" button. (CAM set
up menu is not displayed when it is not required.)
GB - 20 -
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
buttons to highlight the "Common
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
Advertisement
Table of Contents
