Table of Contents
Advertisement
decrease hp volume level. Headphone volume level
can be adjusted between 0 and 63.
sound mode
By pressing
/
button, select Sound Mode. Press
/
button to change sound mode.
Sound mode is used to identify sound mode of the
headphone and can be set to mono, stereo, dual I or
dual II according to the transmission.
balance
By pressing
/
button, select Balance. Press
button to increase balance to the right. Press
button to decrease balance to the left. Balance level
can be adjusted between -32 and +31.
Press the "M" button to return to the previous menu.
Sound Mode
By pressing
/
select Sound Mode. Press
button, you can select Mono, Stereo, Dual I or Dual II
mode, only if the selected channel supports that mode.
AVL
By pressing
/
select AVL
set the AVL as on or off.
Effect
By pressing
/
select Effect.Press
to set Effect as on or off.
Dynamic Bass
Dynamic Bass is used to increase bass effect of the
TV set.
By pressing
/
button, select Dynamic Bass. By
pressing
/
button set Dynamic bass to Low, High
or Off. It is not recommended to select High if listening
at high volume levels. There is a subwoofer output
that can accept an active subwoofer if you wish to
create very high levels of Bass.
Subwoofer is active only if Dynamic Bass is set to
Off.
Subwoofer
It is possible to connect an external, active subwoofer
to the set to give a much deeper bass effect.
By pressing
/
Subwoofer can be set to On or Off.
Dynamic Bass is not available if Subwoofer is set to
On.
Set Subwoofer to On when you connect an external
subwoofer to the set.
Store
• By pressing
/
• Press
or "OK" button to store the adjustments.
"Stored" will be displayed on the screen.
VL.Press
/
button to
/
button, select Subwoofer. .
button select Store.
Features Menu
FEATURE
Sleep Timer
Child Lock
Language
Ext-2 Out
PC Audio In
/
Sleep Timer
By pressing
button to set the Sleep Timer. .
The timer can be programmed between Off and 120
minutes in steps of 10 minutes.
Child Lock
button
By pressing
Press / button to set the Child Lock on or off.When
on is selected, the TV can only be controlled by the
remote control handset. In this case the control panel
buttons will not work. Hence, if one of these buttons
is pressed, "Child Lock On" will be displayed on the
screen when the Menu screen is not visible.
Language
By pressing
/
button to select the language.
Language options are listed below:
English, French, Spanish, Italian, Danish, Finnish,
Swedish, Greek, Norwegian, Dutch, Portuguese, Pol-
ish, Turkish, Russian, Czech, Hungarian, Slovak,
Slovenian, Romanian, Bulgarian, Croatian, Serbian.
EXT2 Out
By pressing
button, to set Ext-2 Out to TV, DTV EXT1, FAV, YPbPr
Audio or PC Audio.
Note: When TV Source is set to HDMI, HDMI Audio
setting will be available among EXT-2 Out options.
Note: If the currently watched source is analogue TV,
a connected device displays analogue TV source as
well. If this source is set to digital mode, connected
device displays digital source. In order to avail this
function, EXT-2 Output should be set to TV/DTV.
GB - 22 -
/
select "Sleep Timer".Press
/
select Child Lock.
/
button, select Language.Use
/
select EXT2 Output.Use
/
/
Advertisement
Table of Contents
