Table of Contents
Advertisement
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power supply cord to the system.
Press Power On/Off button.Then the TV switches
itself to stand-by mode (Optional).
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected, or Press the "-P/CH"
or "P/CH+" button on the TV or press the "P-" or
"P+" button on the remote control, so that last mode
switched off is selected.
By either method the TV will switch on.
To switch the TV off:
• Press the "
(stand-by)" button on the remote con-
trol or On/Off switch on the TV, so the TV will switch
to stand-by mode.
To power down the TV completely, press Power On/
Off button or unplug the power cord from the mains
socket.
Navigating the Menu System
For displaying
menu options
1- Press M to display the menu.
2- Press "
" or "
" button to select an icon. Press
" " for more options.
3- Use "
" or "
" button to highlight.
4- Press " " or " " buttons to change the settings.
Press OK to set as default.
5- To exit the menu or return from sub-menu screen,
press M.
These explanations are available for the navigation
of the whole Menu System. To select options that are
explained in the following parts, refer to "Navigating
The Menu System".
TV
DTV
For navigation
To confirm choices
Initial Settings
When the TV is turned on for the first time, IDTV is on
first. Because this is the first time that IDTV has been
used, there are no channels stored in the memory.
When the TV is turned on for the first time, the menu
for the language selection appears on the screen.
The message "Welcome please select your lan-
guage!" is written in all language options sequen-
tially in the menu on the screen.
By pressing
you want to set and press "SELECT" button. In the
menu "Set Language" is written next to "OK" item to
indicate that "Press SELECT button to set the high-
lighted language option."
You can get information about the menu usage by
pressing "
to exit the help menu.
After "then, First time Installation Menu will appear on
screen.By pressing
try item you want to set and press "SELECT" button
First time installation
Choose Country
Set country and continue installation
OK
After the First time Installation is set, the following
message appears on the screen.
Do you want to start automatic search?
• To start automatic search, select "Yes", to cancel
select "No".
• To select an option "Yes or No", highlight the item by
using
or
The IDTV will automatically tune to the transmission
channels according to selected country standards
looking for digital terrestrial TV broadcasts and dis-
playing the names of channels found. This process
will take about five minutes. To cancel searching,
you can press "M" button at any time during the
process.
Automatic Search
Codec 4:3
Codec 16:9
Searching UHF channels 62. Please wait. This will take a few minutes
Cancel searching
MENU
GB - 11 -
or
buttons highlight the language
" button. And press "
or
buttons, selected coun-
Yes
No
buttons and press "SELECT" button.
" button again
Czech
Advertisement
Table of Contents
