Common Interface; Menu System; Picture Menu - Hitachi 32LD8700U B Instructions For Use Manual

Hide thumbs Also See for 32LD8700U B:
Table of Contents

Advertisement

Detailed information about Sound, Picture
and Feature menus are in AnalogueTV
Menu System section on page 17.

Common Interface

• Press the "
" button to display the Main
Menu and use the
the "Common Interface" line and press the
"OK" button.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
It is required to subscribe to a pay channel
company to view the pay channels of the
Digital Terrestrial broadcasting.
Obtain the Conditional Access Module (CAM)
and the Viewing card by subscribing to a pay
channel company, then insert those to the
Television using the following procedure.
1. Switch off the TV and unplug from the
mains.
2. Insert the CAM, then Viewing Card to
the slot that is located in the terminal
cover at the left-hand side of the TV (from
front view).
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The
CAM or the TV terminal may be damaged if
the CAM is forcefully inserted.
or
button to highlight
3. Connect the TV to the mains supply,
switch on and then wait for few moments
until the card is activated.
• Some CAMs may require the following set
up. Please set the CAM by entering the IDTV
menu, Common Interface then pressing the
"OK" button. (CAM set up menu is not dis-
played when it is not required.)
• To see the viewing contract information:
Enter IDTV; press the "
light Common Interface and press the "OK"
button.
• When no module is inserted, "No Common
Interface module detected" message ap-
pears on the screen.
• Refer to the module instruction manual for
details of the settings.

Menu System

Your TV has been designed with a menu
system to provide easy manipulation of a
multifunction system.
Press the
button to enter the menu. Press
/
button to select a menu title and then
/  button to select a menu item and
"OK" button to enter the menu item.
• Press the
• Press the
menu.

Picture menu

By pressing
/
Picture menu appears on the screen.
Mode
Contrast
Brightness
Sharpness
Colour
Colour Temp
Noise Reduction
Film Mode
3D Comb
Reset
- 17 -
" button, then high-
button to exit the menu.
button to return to the previous
button, select the first icon.
PICTURE
Cinema
Warm
Medium
Off
Off
PAL 50Hz
/
or
62
24
10
32

Advertisement

Table of Contents
loading

Table of Contents