Sound Menu; Feature Menu; Source Menu; Sound In Pc Mode - Hitachi 32LD8700U B Instructions For Use Manual

PC PICTURE
Contrast
Brightness
Colour Temp
R
G
B
Reset
Contrast, Brightness and Colour Tempera-
ture adjustments in this menu are identical to
adjustments defined in TV picture menu.
When Colour Temp is Manual, you can also
adjust the R,G,B items. R, G and B adjust the
TV image colour in PC mode. You can
change the TV colour to your desired colour:
R (Red), G (Green), B (Blue)
Select Reset and press
to reset the picture modes to factory default
settings.

Sound Menu

 
By pressing / button, select the third icon.
Sound menu appears on the screen.
The items in this menu are described at
Sound menu starting page 18.

Feature Menu

 
By pressing /
icon. Feature menu appears on the screen.
The items in this menu are described at Fea-
ture menu starting page 20.

Source Menu

 
By pressing / button, select the fifth icon.
Source menu appears on the screen.
In source menu, highlight a source by press-
/  button and switch to that mode by
ing

 
pressing / or "OK"button.

Sound in PC mode

• Connect the PC's Audio output to the TV's
PC Audio In socket with an audio cable.
46
30
Normal
32
32
32
 
/ or "OK" button
button, select the fourth

Other Features

TV Status

Programme Number, Programme Name,
Sound Indicator and Zoom Mode are dis-
played on the upper right side of the screen
when a new programme is entered or
ton is pressed.

Mute Indicator

It is placed in the upper left side of the screen
when enabled.
To cancel mute, there are two alternatives;
the first one is pressing the
second one is increasing/decreasing the vol-
ume level.

PIP and PAP modes

Press the
At PIP Mode, a small picture (PIP picture) is
displayed on the main picture. There are 1
size and 4 positions (upper left, upper right,
bottom left and bottom right) available for the
PIP window. You can use
change the PIP position. Aspect Ratio of the
PIP window is fixed and 4:3.
When PIP Mode is entered, the default active
window is PIP window and the active window
is indicated by a green frame around it. The
active window can be changed by pressing
 
the / button. The status info OSD belongs
to active window. The place of the status
OSDs are same for both windows.
For PIP picture restrictions, see table on
page 35.
Press the
mode.
At PAP Mode, two pictures with equal sizes
are displayed on the screen. Aspect Ratios
of the windows are fixed.
When you switch to PAP Mode, Main window
in PIP Mode is displayed on the right side of
- 24 -
button and the
button to switch to PIP mode.


/
button twice to switch to PAP
but-
button to