Configuration - Hitachi 32LD8700U B Instructions For Use Manual

"OK" button in the auto-search pop up
menu. All the services are searched and a
channel table is created automatically.
All channels found are stored in a sorted
form with respect to their channel numbers.
Some services may not appear with the cor-
rect channel number. At the time of printing,
not all broadcasters are sending their chan-
nel number information.
Manual Search:
In manual search, the number of the multi-
plex is entered manually and only that multi-
plex is searched for the channels. For every
valid channel number, signal level, signal
quality and network name are shown at the
bottom of the screen.
In both manual and auto search any existing
channel in the database is not re-stored to
avoid redundant duplicates of that channel.
FIRST TIME INSTALLATION
The user can use this item to load default
settings, which had been loaded to the re-
ceiver at the factory.
To install factory settings, highlight "First
Time Installation" menu and press the "OK"
button, then you will be asked to confirm for
deleting all channels and settings.
Installation
Add New Channels
First Time Installation
Your previous digital channel list will be destroyed.
Are you sure you want to delete all digital channels
and settings for first time installation?
Yes
By selecting YES and pressing the "OK" but-
ton, the existing channel table will be deleted.
After factory settings is loaded, "First Time
Installation" menu will be displayed.
Please ensure aerial is plugged in. Do you
want to start first time installation?
Yes
Press the "OK" button to start installation. Af-
ter search is completed for digital channels, a
message asking search for analogue chan-
nels appears on the screen.
No
No
- 13 -
Do you want to search for
analogue channels?
Yes
Press the "OK" button to search for analogue
channels.The following menu appears on the
screen for analogue channel search.
PROGRAM
Country
WARNING !
All prestored programs
will be deleted
First of all choose Language and Country by
using / and
fect the sort process in APS. To start APS,
press the RED or "OK" button.
APS is running...
UK - I
After APS is finalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers
and names assigned to the programmes.
If you do not accept the locations and / or the
programme names, you can change them in
the Program menu. (See page 22 for Pro-
gram table explanation.)

Configuration

Press the " " button to display the Main
Menu and the button twice to highlight
Configuration, then press the "OK" button to
display the Configuration menu. Press the
" " button to leave the menu.
No
UK
OK Cancel
/ buttons. This will af-
055,25 Mhz
Cancel