Displaying The Picture - Hitachi ED-X40 User Manual

Displaying the picture

1. Activate your signal source. Turn the signal
source on, and make it send the signal to
the projector.
Use the VOLUME + / VOLUME - buttons
2.
to adjust the volume.
To have the projector silent, press the MUTE
button on the remote control.
3. Press the INPUT button on the projector.
Each time you press the button, the
projector switches its input port in turn.
You can also use the remote control to
select an input signal. Press the VIDEO
button for selecting an input signal from the
COMPONENT (Y, Cb/Pb, Cr/
or VIDEO port, or the COMPUTER button
for selecting an input signal from the
COMPUTER IN1 or COMPUTER IN2 port.
4. Press the ASPECT button on the remote
control. Each time you press the button,
the projector switches the mode for aspect
ratio in turn.
5. Use the zoom ring to adjust the screen
size.
6. Use the focus ring to focus the picture.
NOTE The ASPECT button does not work when no proper signal is inputted.
in the CD.
10
, S-VIDEO
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
AUTO
ASPECT SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP VOLUME+ button
ON
DOWN
VOLUME- button
OFF
KEYSTONE MY BUTTON MUTE
1 2 MUTE button
POSITION MENU
ENTER
ESC RESET
INPUT button
VIDEO button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
COMPUTER button
ASPECT AUTO SEARCH BLANK
PAGE VOLUME
MAGNIFY FREEZE
UP
ON
ASPECT button
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
MENU
POSITION
ENTER
ESC RESET
Zoom ring