Important Points; If One Of These Messages Appears - Fujitsu GPS User Manual

For reference

1. Important points

If one of these messages appears

If any of the following messages are displayed, check the unit while referring to the cause and
corrective action columns.
Messages
Check GPS antenna
Check speed pulse
No previous points exist.
Your home is not registered.
Register using the My places
function on the Menu screen.
You have not registered this quick
access point. Resister using the My
Places function on the Menu
screen.
There are no roads near your
current position that can be used
for guidance .
Please refer to the map.
There are no roads near your
current position and your
destination that can be used for
guidance .
Please refer to the map.
There are no roads near your
destination that can be used for
guidance.
Please refer to the map.
This route uses time restricted
roads.
The destination is too far away.
Please change your destination to
a point with in a 3200 miles straight
line.
Further settings are not possible.
Perform operation again after
deleting one or more setting.
Unable to save additional memos.
Please delete some memos.
194
Cause
The GPS antenna is not connected
properly.
The device is not properly
connected to the vehicle speed
sensor.
There are no previously set
destinations.
Your home is not registered as a
memory point.
Quick access is not registered for
the memory point.
There are no roads where route
guidance is possible in the vicinity
of the present location.
There are no roads where route
guidance is possible in the vicinity
of the present location and
destination.
There are no roads where route
guidance is possible in the vicinity
of the destination.
The route searched for includes
time restricted roads.
The set destination is too far.
There are no roads available to
serve as preferred roads when
indicating one for a route change.
You attempted to set more than 5
destinations.
Corrective action
Connect the GPS antenna
properly.
Connect the vehicle speed sensor
properly.
Register a destination in the
archive and proceed. (Setting a
destination registers it in the
archives).
Register your home as a memory
point and proceed. (See page 140)
Register quick access for the
memory point and proceed. (See
page 159)
Refer to a map and proceed.
Refer to a map and proceed.
Refer to a map and proceed.
Reinitiate a route search that
avoids time restricted roads if you
want to avoid them. (See page
105)
Set the destination within a 5,000
km distance in straight line.
Move the map and indicate a
preferred road among the roads in
the vicinity.
Up to 5 destinations can be set.
Delete unnecessary destinations
and proceed with adding new ones.
(See page 115)