Table of Contents
Advertisement
●The range of the image may vary depending on the vehicle and the road
conditions.
●There is a limit to the range of the camera. Objects near the ends of the bumper
and under the bumper cannot be seen.
●The rear image color may vary from that of the actual objects.
●The image brightness and contrast can be adjusted. (Refer to "Adjusting/
setting the screen" in the "Owner's manual/Audio".)
●Depending on the vehicle, the back guideline may appear misaligned on the left
and right. This is not a malfunction.
●In the following situations, the screen may be difficult to view. This does not
constitute a malfunction.
• In a dark area (such as at night)
• When the temperature near the camera is high or low
• When raindrops are on the camera lens or the humidity is high (when raining)
• When foreign matter is near the camera (such as mud)
• When the sun or a beam from headlights strikes the camera lens directly
• When a high-luminance point strikes the camera (such as the reflection of the
sun's rays on the chassis), a smear effect* typical of CCD cameras may occur.
[Screen display]
*Smear effect: A phenomenon where a
vertical line appears from a
high-luminance point striking
the camera (such as the
reflection of the sun's rays on
the chassis).
High-luminance point
179
Advertisement
Table of Contents
