Setting The Average Speed - Fujitsu GPS User Manual

The following times are calculated using the average speed of your vehicle.
● Arrival time / time to destination on the present location screen (page 16)
● Arrival time / time to destination on the all-route display screen (page 102)
● List of required times for segments (simultaneous 3-route display) (page 109)
Setup
Touch
Set Speed
Touch
Travel Time.
Set the speed for each road.
● Touch
to increase the speed, and
touch to decrease it. (Each touch
raises or lowers the speed by 5 mph.)
Touch OK .
●The required time is calculated using the average speed of your vehicle. The
actual required time may vary depending on driving conditions.
●When deviating from the set route, the
●When you reach the maximum (Freeway 75 mph / Main street 55 mph /
Residential 25 mph) or minimum (5 mph) speed, the
appear shaded and cannot be operated.
Default
●Touch
Default
●Touch
settings (Freeway 55 mph / Main street 35 mph / Residential 25 mph).

Setting the average speed

in the menu screen.
for Estimated
in the setup screen to return all items to their default settings.
in the change speed screen to return all speeds to their default
destination direction mark will appear.
and/or switch will
129