Fujitsu GPS User Manual page 176

Optional function
1. Rear view camera operations
●The actual position and distance of people or objects may vary depending on the
features of the camera lens.
●Do not expose the camera to strong shocks such as hitting it or knocking it into
other objects. The rear view camera may not function properly if the position of
the camera or its mounting angle is incorrect.
●The camera is waterproof. Do not uninstall, dismantle or reconfigure the unit.
Otherwise, the rear view camera may not function properly.
●If the camera cover is rubbed strongly or a hard brush or abrasive is used to
clean it, the camera may get scratched, adversely affecting the image quality.
●The camera cover is made of plastic. Do not apply organic solvent, body wax, oil
remover, glass coating, etc. to it. If any of the above have been applied, wipe off
immediately.
●Pouring hot water on the rear view camera to deice it in cold weather can lead to
a drastic change in temperature that may render normal operation impossible.
●The rear view camera may not operate normally if the camera is damaged as a
result of it being hit. Immediately bring it to your local retailer for an inspection.
●Do not leave the unit in direct sunlight for long periods of time. Otherwise, a
printed image phenomenon may result.
●The images shown in the illustrations are merely examples. The range appearing
on the monitor screen varies depending on the vehicle model.
●The instant the vehicle is put in reverse, part of the monitor will appear white then
gradually stabilize.
●A white vertical band will appear when the camera is struck by light from the sun,
headlights or any other strong light beam source. This is called the smear effect.
●After having used the unit for a long time, white scratches and vertical lines may
appear at high temperatures, depending on the features of the CCD.
●The 50 Hz power source range fluorescent light may cause flickering in the
screen. This is not a malfunction.
●Because the rear view camera uses a special lens, the image and distance
appearing on the screen differs from the actual image and distance.
176