Adding A Destination - Fujitsu GPS User Manual

Adding a destination

After setting a destination, up to 5 more destinations can be set.
Add a destination in the following situations.
● When setting a transit point between the present location and set destination.
● When changing the set destination into a transit point and setting a new destination.
Using the same method as for setting a destination, touch
(See "Set by directly moving the map" on page 98, "Set using a registered point" on
page 100 and "Set using a map retrieval method" on page 101).
Touch Route
Touch
Add
Select the map retrieval method to
display the map on which a
destination is to be set.
● "Map retrieval methods" and
"Performing operations on a retrieved
map" (page 55, 94).
●Destinations can be set using detailed maps with a reduction scale of under 0.5
miles.
●Set destinations are automatically registered (up to 100 points) and can be used
to retrieve a map when setting a destination. After exceeding 100 points, the
oldest entry is deleted every time a new one is entered. Unnecessary points can
be deleted. (Refer to the section "Deleting destination archives" on page 170.)
●When 2 or more destinations are set,
.
for Destination.
Add to
to add a new destination.
Reorder
appears.
Continue to the next page
111