Table of Contents
Advertisement
Navigation guidance
4. Starting, pausing and restarting route guidance
Starting route guidance
When the route search is complete, the all-route display screen appears. Touch
the all-route display screen to start route guidance. Route guidance can be paused and
restarted.
Touch
Guide
display screen.
● Route guidance is started.
NAVI
● If
is pressed after the all-route
map appears, or you do not operate
the device for at least 3 seconds after
you start driving, route guidance will
begin.
Demonstration
Once the route search is complete, you can watch a demonstration before starting route
guidance.
Touch and hold
3 seconds.
Press
NAVI
DEST
) while the demonstration is
in progress.
● The demonstration stops.
● If you start driving while the
demonstration is in progress, the
demonstration will stop and route
guidance will start.
●The demonstration (demo) can be viewed in the all-route map screen, displayed
after both destination settings and route search have been completed (before
route guidance). However, the demonstration is not available while driving.
●To increase the speed of the demonstration, make the reduction scale greater.
(Refer to the section "Switching the map reduction scale" on page 37)
●To decrease the speed of the demonstration, make the reduction scale smaller.
(Refer to the section "Switching the map reduction scale" on page 37)
in the all-route
Guide
for at least
(or
/
NAVI MENU
● Demo in progress screen
Guide
on
117
Advertisement
Table of Contents
