Belt Clip - Motorola LS350 User Manual

Belt Clip

Your pager has a removable belt clip. To remove and replace the belt clip,
follow the instructions below.
Removing the Belt Clip
Insert the pointed end of a non-metallic
item (such as a pen cap) into the top
end of the belt clip as shown in the
illustration.
Push down on the tab and slide belt clip
forward to separate it from the pager.
Replacing the Belt Clip
Align the belt clip with the belt clip holder.
Slide the belt clip into the holder until it snaps back into place.
Push down on tab
to release
belt clip
31