Upc/Ean/Jan Supplemental Redundancy; Transmit Upc-A/Upc-E/Upc-E1 Check Digit - Symbol LS3578 Product Reference Manual

11 - 12 Symbol LS3578 Product Reference Guide

UPC/EAN/JAN Supplemental Redundancy

With Autodiscriminate UPC/EAN/JAN Supplementals selected, this option adjusts the number of times a
symbol without supplementals is decoded before transmission. The range is from two to 30 times. 14 or above is
recommended when decoding a mix of UPC/EAN symbols with and without supplementals, and the
autodiscriminate option is selected. The default is set at 7.
Scan the following bar code to set a decode redundancy value. Next, scan two numeric bar codes from
D, Numeric Bar Codes. Use a leading zero for single digit numbers. In case of an error, or to change the selection,
scan Cancel on page

Transmit UPC-A/UPC-E/UPC-E1 Check Digit

The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar
code to transmit the bar code data with or without the UPC-A, UPC-E or UPC-E1 check digit. It is always verified to
guarantee the integrity of the data.
UPC-A Check Digit
D-3.
UPC/EAN/JAN Supplemental Redundancy
*
Transmit UPC-A Check Digit
Do Not Transmit UPC-A Check Digit
Appendix