Projection; Turning The Power On - Hitachi PJ-TX200 User Manual

Projection

Projection

Turning the power on

1.
Make sure that the power cord is firmly and correctly connected to both the
projector and power outlet.
2.
Open the lens cover, and set the power switch to
the ON position.
The power indicator will light a steady orange. Then
wait several seconds because buttons may not
function for the first several seconds the projector
is turned on.
3. Press the STANDBY/ON button on the projector or
the POWER button on the remote control.
The projector lamp will light up and the POWER
indicator will begin blinking in green. When the
power is completely on, the indicator will stop
blinking and light a steady green.
WARNING
into the projector lens or openings.
NOTE
• Turn the power on in the correct order. Turn on the projector before
the connected devices.
20
► When the power is on, a strong light is emitted. Do not look
STANDBY/ON
STANDBY/ON button
TEMP
POWER LAMP
POWER button
MENU ENTER
POWER indicator
INPUT RESET
POWER LIGHT
BLACK MODE MEMORY
ASPECT IRIS
ENTER
MENU RESET
BRIGHT CONTRAST COLOR
HDMI PC AUTO
COMPO S-VIDEO VIDEO
POWER
( Steady orange)