Connections; Connecting To Television; Connecting To A Stereo System - Hitachi DVP425UK Instruction Manual

Connecting to television

IMPORTANT!
You only need to make one video connection
from the following options, depending on the
capabilities of your television.
Connect the DVD player directly to the
television.
Using Composite Video Jack(CVBS)
A
Use the composite video cable (yellow) (supplied) to
connect the DVD player s VIDEO(CVBS) jack to the
video input jack(or the labeled as A/V in,Video In or
Composite) on the TV.
B
Use the audio cables(white/red) (supplied) to
connect the AUDIO OUT(L/R)jacks of the DVD
player to corresponding AUDIO IN jacks on the TV.
Using Component Video Jacks(Y, P
Helpful hint: Before making or changing any connections, make sure that all the devices are
7
CVBS
SCART OUT
CVBS Pb
Pr
, P
b
SCART OUT
CVBS
Pb
Pr
disconnected from the power outlet.
IMPORTANT!
The progressive scan video quality is only
possible when using Y, P
scan TV is required.
A
Use component video cables (red/blue/green) to
connect the DVD player's Y, P
corresponding Component video input jacks (or
labeled as Y, P
B
Use the audio cables (white/red) (supplied) to
connect AUDIO OUT (L/R) jacks of the DVD player to
the corresponding AUDIO IN jacks on the TV.
C
Proceed to page 12 for detailed Progressive Scan set
up.

Connecting to a Stereo System

Stereo system has Right/Left Audio In
Jacks
A
Select one of the video connections (CVBS VIDEO
IN, COMPONENT VIDEO IN) depending on the
)
r
options available on your TV.
B
Use the audio cables (white/red)(supplied) to
connect AUDIO OUT (L/R) jacks of the DVD player
to the corresponding AUDIO IN jacks on the stereo
system.

Connections

P and a progressive
b, r
P jacks to the
b, r
P ) on the TV.
b, r
CVBS Pb
Pr