Mitsubishi Electric MIM-A01 Instruction Manual page 54

AT Commands MIM-A01
AT+T Read - Reading a Stored Message
AT+T Read=Number..
Lists the message with the indicated ID from the memory of the modem.
The message is not deleted and can be read as often as you want.
Number:
Response:
Short response (AT+T Verbose="Off"):
Comprehensive response (AT+T Verbose="On"):
Message:
ParameterList:
Number:
Type:
Time:
Example:
An SMS message with the number 11 is read out:
AT+T Read = 11
Modem reply:
+T Read: 11, SMS, 2001/10/07,12:05:55
"From:071346768422; TimeStamp:2001/10/07,12:05:37"
*That is a message from Hans!
OK
8 - 20
Number of the message to be read. This number can be determined using
the List command. To read the first stored message (that is the oldest),
enter a 0 (zero).
+T Read= number, type, time
*message
OK
+T Read: Number, type, time
"ParameterList"
*message
OK
Text of the message.
Each text line of the stored message begins with *
Additional Parameters - depending on message type.
Number of the message to be read.
SMS, Express E-Mail or Internet e-mail
Time stamp of the message
is set after successful receipt from the Tixi AT Modem.
Appendix
MITSUBISHI ELECTRIC