Do you have a question about the MELCloud and is the answer not in the manual?
Questions and answers
Nicki Grineaux
April 17, 2025
How to reconnect wps to the internet
1 comments:
Mr. Anderson
May 9, 2025
To reconnect Mitsubishi Electric MELCloud to the internet using WPS:
1. Select WPS-PUSH mode on the device. 2. Ensure the LED display shows "Connect Flashes (every second)." 3. Press the WPS button on your router within 2 minutes. 4. If successful, the LED will first show "Connected ON (5 sec.)," then change to "Connected Flashes (every 5 seconds)." 5. If the WPS button is not pressed within 2 minutes or the connection fails, the device will return to the initial state. Repeat the steps if needed.
This answer is automatically generated
james macdonald
February 23, 2025
what target temperature does melcloud holiday mode set our system to?
1 comments:
Mr. Anderson
May 14, 2025
The target temperature in holiday mode can be set by the user. One user reported their system runs at 13°C in holiday mode, which they likely set manually. There is no fixed default; it depends on user configuration.
This answer is automatically generated
M1CHELE
June 5, 2025
Has anyone successfully connected to a starlink router.
Need help?
Do you have a question about the MELCloud and is the answer not in the manual?
Questions and answers
How to reconnect wps to the internet
To reconnect Mitsubishi Electric MELCloud to the internet using WPS:
1. Select WPS-PUSH mode on the device.
2. Ensure the LED display shows "Connect Flashes (every second)."
3. Press the WPS button on your router within 2 minutes.
4. If successful, the LED will first show "Connected ON (5 sec.)," then change to "Connected Flashes (every 5 seconds)."
5. If the WPS button is not pressed within 2 minutes or the connection fails, the device will return to the initial state. Repeat the steps if needed.
This answer is automatically generated
what target temperature does melcloud holiday mode set our system to?
The target temperature in holiday mode can be set by the user. One user reported their system runs at 13°C in holiday mode, which they likely set manually. There is no fixed default; it depends on user configuration.
This answer is automatically generated
Has anyone successfully connected to a starlink router.