Mounting - Mitsubishi Electric MIM-A01 Instruction Manual

Mounting

3.3 Mounting
Mount the modem by pushing or snap fitting it onto a DIN rail (top-hat rail 35 mm).
E
ATTENTION :
b The device must only be used in rooms that are dry and clean. Protect the devi-
ce from humidity, water splashes or heat.
b Do not subject the device to severe vibration.
P
DANGER:
b The device must not be used in environments containing flammable gases,
fumes or dust.
3 - 10
0
2
7
9
5
4
5
4
1
0
3
4
Mounting and Installation
Fig. 3-9:
Pull out the black tab on the device using
a screwdriver and so the device can
snap fit to the DIN rail. You can remove
the device from the rail in the same way.
Ensure that the retaining mechanism of
the modem snaps cleanly and securely
into the DIN rail.
Fig. 3-10:
Modem mounted on the DIN rail
MITSUBISHI ELECTRIC