Transferring From Delta 66 To Dat, Monitoring With Dat - M-Audio Delta 66 User Manual

6. Within your recording software, select "S/PDIF In Delta-66," as the audio input
device. The Delta input appears as a stereo pair.
7. Start your software recording and then start your DAT material playing. You
should be able to hear the DAT material through your sound system.

Transferring from Delta 66 to DAT, monitoring with DAT

1. Connect the Delta 66's S/PDIF Out to the DAT's coaxial S/PDIF Input using a
good quality cable.
2. Connect the DAT analog outputs to some type of amplified sound system. The
sound system should be equipped with speakers or headphones.
3. Because you will be playing back at the recorded sample rate, you will want to
set the Delta 66's master clock to use the Delta 66's internal crystal. Do this by
opening the Hardware Settings page of the Delta Control Panel software and
38