Patchbay/Router Page - M-Audio Delta 66 User Manual

Digital recording interface
Hide thumbs Also See for Delta 66:
Table of Contents

Advertisement

adjustment (in 1% increments), you may click on the pan control to make it active,
and then use the left/right or up/down cursor keys on your computer keyboard.
Either way, while the pan setting is being adjusted, its value will appear numerically
in the Master Volume's status box (below the Master Volume Stereo Gang control)
as a percentage from left pan to right pan: -100% represents far left, +100%
represents far right, and 0% represents the center.
SOLO: Each mixer input channel has a "Solo" checkbox associated with it.
Clicking on and activating a Solo box will solo the selected channel by essentially
muting all other signals. When more than one channel has Solo selected, all solo
channels will be summed to the solo 'buss' (path), which is what one might consider
an 'in place' solo as opposed to a PFL, or pre-fader listen (levels and pans still
apply). Deactivating all solo boxes will return all input channels to their previous
mute/unmute states.
MUTE: Every mixer input channel has a "Mute" checkbox associated with it.
Clicking on and activating the Mute box will remove that signal from the stereo
buss. Deactivating the Mute box will add the signal back into the stereo buss.
STEREO GANG: All input channel pairs have a "Stereo Gang" capability. Clicking
on and activating the Stereo Gang checkbox will link (or "gang") the left/right faders
so that both channels may be adjusted together as a stereo pair.

Patchbay/Router Page

The Patchbay/Router page allows you to connect each of the Delta 66's hardware
outputs (2 pairs of analog outputs and 1 pair of digital output channels) to specific
audio sources within the Delta 66 board.
"Patchbay/Router" tab of the Delta Control Panel.
ON THE MAC: Please substitute the name "SM/ASIO" where referrences are made
to "WavOut." SM/ASIO are the software outputs on the Mac, while WavOut are the
software outputs on the PC. Substitute "Windows multimedia applet" with "Sound
Manager Applet."
The leftmost vertical column of Patchbay/Router page, "H/W Out 1/2," connects this
hardware analog stereo pair to one of six stereo sources:
1. The default setting, "WavOut 1/2", connects ports OUT1 and OUT2 to your
music software or Windows multimedia applet. In other words, when music
software plays audio to the device named "WavOut 1/2 Delta-66" it will be
routed directly to the "hardware" analog outputs 1 & 2 of your Delta 66's break-
out box.
2. The second option, "Monitor Mixer," connects ports OUT1 and OUT2 to the
outputs of the Delta 66 monitor mixer. For more information of the capabilities
of the monitor mixer, please see the section "Monitor Mixer Page."
To display this page, click the
18

Advertisement

Table of Contents
loading

Table of Contents