M-Audio Delta 1010LT User Manual page 58

stereo buss or output. When selecting 'alt out' on a channel, it mutes that channel to the
stereo buss and redirects it to the alt out buss. This could be viewed as a 2-buss system,
and can be used effectively for recording purposes.
In our Typical Setup 1 and 2 in the previous section, we used pre-amps to handle the
recording. A line mixer that simply received the line outputs from the 1010LT and mixed
them to stereo could handle the monitoring needs. Hopefully, the information here will
give you some insight into how to use the gear that you own, or what to look for if you
are seeking additional equipment to facilitate your hard disk recording.
58