Drive0 Submenu Of The System Menu - Fujitsu Lifebook MH380 Bios Manual

Drive0 Submenu of the System Menu

The Drive0 submenu iallows you to enable or disable the installed hard disk drive and to view information about it..
Drive0:
Type:
Model:
Capacity:
F1 Help
ESC Exit
Table 3: Fields, Options and Defaults for the Drive0 Submenu of the System Menu
Menu Field
Drive0:
Type:
Model:
Capacity:
Exiting from System Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
Phoenix SecureCore(tm) Setup Utility
System
Drive 0: [WDC WD2500BEVS-16VAT0]
[Enabled]
Hard Disk
WDC WD2500BEVS-16VAT0
250GB
(250,059,350,016 Bytes)
Select Item
Select Menu
Figure 3. Drive0 Master Submenu
Options Default
■
Disabled [Enabled]
■
Enabled
---
---
--- ---
--- ---
-/Space Change Values
Enter Select Sub-Menu
Description
Allows you to enable or disable the hard disk drive.
The type of drive identified as Drive0.
The model of your hard disk
The maximum capacity of your hard disk
S y s t e m M e n u
Item Specific Help
[Disabled]
The drive is disabled.
[Enabled]
The drive is enabled.
F9 Setup Defaults
F10 Save and Exit
7