Drive0 Submenu Of The System Menu - Fujitsu LifeBook P3010 Bios Manual

Drive0 Submenu of the System Menu

The Drive0 submenu identifies what ATA devices are installed.
Info
Drive0:
Type:
Model:
Capacity:
F1 Help
ESC Exit
Table 3: Fields, Options and Defaults for the Drive0 Submenu of the System Menu
Menu Field Options
■
Drive0: Disabled
■
Enabled
Type: ---
Model: ---
Capacity: ---
Exiting from System Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
Phoenix SecureCore(tm) Setup Utility
System Advanced
Drive0 [WDC WD3200BEVS-16VAT0]
[Enabled]
Hard Disk
WDC WD3200BEVS-16VAT0
320GB
Select Item -/Space
Select Menu Enter
Figure 3. Drive0 Master Submenu
Default
[Enabled]
---
---
---
Security Boot Exit
[Disabled]
The drive is disabled.
[Enabled]
The drive is enabled.
Change Values
Select Sub-Menu
Description
Enables or disables Drive0.
Displays the drive device type in Drive0. This field is for information only.
Displays the model number of the device in Drive0. This field is for
information only.
Displays the maximum capacity of your hard disk. This field is for
information only.
S y s t e m M e n u
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
7