Level Setup; Distance Setup - Halcro SSP100 Quick Setup Manual

Manual Level and Distance Calibration

Level Setup

Output channel levels are adjusted in Level setup. Speaker levels can be measured using a
SPL meter.
Calibrate channel levels:
·
Select Speaker Setup / Level Setup menu.
·
Use the UP or DOWN keys to highlight the speaker/channel level you want to adjust.
·
Press the TEST key to generate the calibration tone
·
Use the LEFT or RIGHT keys to adjust the level to your desired setting (75dB) on the
SPL meter.
·
Repeat this process until you are happy with all level settings.
·
Use the UP or DOWN keys to highlight EXIT and press ENT to return to the Speaker
setup menu
·
The test tone can be switched off by pressing the TEST key
Note: The adjustment range is from 15.0 dB to +15.0 dB with 0.5 dB steps.

Distance setup

Speaker distances must be correctly setup to ensure sound arrives simultaneously to the
listening position.
Setup Speaker Distances:
·
Select Speaker Setup / Distance setup menu
·
Use the UP or DOWN keys to highlight the speaker/channel you want to adjust.
·
Use the LEFT or RIGHT keys to adjust the distance to the correct setting.
·
Repeat this process until you are happy with all distance settings.
·
Use the UP or DOWN keys to highlight EXIT and press ENT to return to the Speaker
setup menu.
LEVEL SETUP
>
Left
Center
Right
Right surround
Right back
Left back
Left surround
Subwoofer
EXIT
DISTANCE SETUP
>
Left
Center
Right
Right surround
Right back
Left back
Left surround
Subwoofer
EXIT
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
6ft
5ft
6ft
3ft
0ft
0ft
3ft
0ft