INTRODUCTION
The HS15
the
GRAPHIX ADVANTAGE
Performance
The HS15
long using carbide blades for crisp, sharp cuts.
The HS15
technology, which offers you a choice of two cutting modes selected
from the plotter keypad:
T
Tangential Knife Mode keeps the blade aligned with the direction
of plotting motion for cutting thick materials (such as sandblast
resist) and for pouncing patterns.
T
Swivel Knife Mode cuts faster than tangential knife mode for rapid
cutting of all but the most demanding materials, such as sandblast.
Gerber's exclusive Corner Correcting Technology ensures sharp,
easy-to-weed corners in swivel knife mode.
Able to handle complex jobs, the HS15
on a straight line (X or Y axis). When used with the
ADVANTAGE
transmit jobs while the operator continues to design at the system.
is a state-of-the-art 15-inch plotter designed for use with
plus
® system.
plus
is designed to precisely register graphics up to 50 yards
plus
features Gerber's exclusive Knife Mode Switching
plus
, the HS15
uses the Plot Spooler feature to queue and
plus
cuts at 20 inches per second
GRAPHIX
1