Elmo CCD Color Video Camera TNC4604 Instruction Manual

Ccd color video camera

Advertisement

Quick Links

I N S T R U C T I O N M A N U A L
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
CAUTION
Do not use any power supply other than
specified.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
* The CAUTION label is attached on the
bottom of camera.
T N C 4 6 0 4
INFORMATION
This equipment has been tested and found
to comply with the limits for Class A digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection against
harmful interference when the equipment
is operated in a commercial environment.
This equipment generates, use, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a
residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his
own expense.
USER-INSTALLER CAUTION:
authority to operate this FCC verified
equipment could be voided if you make
changes or modifications not expressly
approved by the party responsible for
compliance to Part of the FCC Rules.
Your

Advertisement

Table of Contents
loading

Summary of Contents for Elmo CCD Color Video Camera TNC4604

  • Page 1 I N S T R U C T I O N M A N U A L CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS 1. Read Instructions All the Safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions The safety instructions and instruction manual should be retained for future reference. 3. Heed Warnings All warnings on the appliance and in the instruction manual should be adhered to.
  • Page 3: Part Names And Functions

    PART NAMES AND FUNCTIONS 60 (2.4) Lens mount Mount a CS-mount lens. Camera mount For mounting a camera on wall, housing, etc. (1/4"-20UNC thread) Focusing dial For fine-adjustment of the lens back-focus. IRIS terminal Connect when an automatic iris lens is used. VIDEO OUT terminal Connect to a monitor TV, etc.
  • Page 4: How To Use

    HOW TO USE 1. Adjust the iris and focus of the lens so that optimum image may be obtained. * Usable lenses CS-mount lenses, whose length "L" (in the illustration) from the bearing surface of the mount is 4mm or less if protruded, should be used.
  • Page 5: Camera Controls

    CAMERA CONTROLS AGC switch In case of necessity, set the AGC switch to OFF position. BLC (Black Light Control) switch With the AGC switch at ON position, BLC are available. In case the back lighting is too bright to shoot the main object clearly, set this switch to ON position. INT/LL switch •...
  • Page 6 turned on. This is necessary to stabilize the camera against the power noise. White balance selector Manual or Automatic white balance modes are selectable. With the setting at AUTO position, the camera automatically adjusts to the color temperature and adjusts the white balance. The camera is factory-set at AUTO position.
  • Page 7: Specification

    SPECIFICATION Model Power source DC12V (DC11V-35V) Power consumption Approx.3.7W Pick-up device 1/3"Color interline-transfer CCD Effective picture element 768 (H) x 494 (V) Scanning area 4.88mm (H) x 3.66mm (V) Scanning system 2:1 interlaced Scanning frequency (H) (V) 15.734kHz 60Hz Sync. system Internal Resolution 480 TV lines (Horizontal) 350 TV lines (Vertical)
  • Page 8 Should it gets wet, turn off the power immediately and contact your dealer. ELMO CO., LTD. OVERSEAS SUBSIDIARY COMPANIES ELMO Mfg. Corp. ELMO Canada Mfg. Corp. 1478 Old Country Road, 44 West Drive, Brampton, Plainview, NY 11803-5034 Ontario, L6T 3T6, U.S.A.

This manual is also suitable for:

Tnc4604x

Table of Contents