Changing The Bobbin - Duerkopp Adler 506 Operating Instructions Manual

2.4 Changing the Bobbin

12
1
Remove the empty bobbin
–
Press the " " key.
For better accessability by the seamstress a second key with the
same function is to be found at the left on the head cover.
–
Hold the cover 4 and push the arresting lever 1 up to unlock the
cover.
–
Tilt cover 4 to the front.
ATTENTION !
Cover 4 is monitored by the safety switch 5.
With the cover open all functions of the controls are blocked.
Starting the sewing sequence after a change of bobbin is only possible
with the cover closed.
–
To swing the bobbin case 3 out press the ejector lever 2 to the left.
–
Remove the empty bobbin from the bobbin case.
2 3 4 5