9
6
18
7
8
Fitting new disc cam
–
Fit the new disc cam.
CAUTION:
Ensure that the drive lever 9 for the longitudinal clamp movement
engages in the inner cam track of the disc cam.
The claw 11 must exactly fit the shaft edges 10.
Remark:
The illustration shows a machine with the intermediate
transmission fitted.
–
Turn the disc cam in the direction of rotation until the claw 11
perceptibly grasps the shaft edges 10.
–
Fully tighten nut 5.
–
Fit new clamps and new bearing plate.
–
Continue to turn the disc cam in the direction of rotation until the
cam 12 is vertically above the shaft 13.
4
5
10
11
12
13