Identities; Load / Save - Lindy Switch User Manual

Identities

This feature helps your VNC viewer
to confirm that a revisited LINDY
KVM IP is genuine and not another
device masquerading as an LINDY
KVM IP. The list given will retain the
identities of all visited units (that
have full security enabled).
When you first make a secure
connection to the LINDY KVM IP,
the security information for that
LINDY KVM IP unit is cached within
this Identities tab (i.e. the "identity"
is known). The next time that you
connect to the LINDY KVM IP, its
identity is checked against the
stored version. If a mismatch is
found between the current and the
stored identities then a warning will
be issued to you.
If an existing LINDY KVM IP is fully reconfigured then it will need to issued with
a new identity. In this case the previous identity, listed in this tab, should be
removed so that a new identity can be created on the next connection.

Load / Save

Configuration File - Reload
Allows you to load a configuration
file saved from this, or another
viewer.
Configuration File - Save
Allows you to save the current
settings so that they can be copied
from one viewer to another.
Configuration File - Save As...
Allows you to save the current
settings under a new name so that
they can be copied from one viewer
to another.
Defaults - Reload
When clicked, all connection
options are returned to the default
settings that are currently saved.
Defaults - Save
When clicked, saves the current connection options as the default set that will
be used in all subsequent VNC connections.