Preventive Maintenance For The Cut-Sheet Feeder; Cleaning; Lubrication - Epson LQ-510 Technical Manual

REV.-A

3.3.4 PREVENTIVE MAINTENANCE FOR THE CUT-SHEET FEEDER

The C80612 cut-sheet feeder is well designed and requires only a minimum of
follows:
Checking the mechanical functions.
l

3.3.4.1 Cleaning

NOTE: If one of the paper-loading rollers is damaged, or if wear is uneven, both rollers must be replaced.
Regularly check the shafts of the paper-loading and paper-ejecting rollers. If the printer fails to move
the the right side cover and check the gear wheels for wear or damage.
paper, open

3.3.4.2 Lubrication

Epson recommends that the points indicated in Figures 3-11 and 3-12 be lubricated with Epson O-3 and
G-14 (see Table 3-8). These lubricants have been thoroughly tested and have been found to comply fully
with the needs of the cut-sheet feeder.
Type
Oil
Grease
E: Epson-exclusive
product
Lubricate the paper support shaft and the paper holder shaft using a cloth moistened with O-3.
Left
Paper Support
LQ-510
WARNING
Table 3-8. Lubricants
Designation Capacity
O-3
G-14
Paper Support Shaft
Paper Holder Shaft
Figure 3-11. Lubrication Points (1)
Availability
40 cc
40 g
or
OPTIONAL EQUIPMENT
preventive maintenance, as
Part No.
E
B710300001
E B701400001
Right
Paper Support
3-15