Epson LQ-510 Technical Manual page 160

DISASSEMBLY, ASSEMBLY, AND ADJUSTMENT
Carriage guide shaft (left):
Carriage guide shaft (right):
Perform gap adjustment at the 10th and 70th column positions and also at the center of
gaps at all three positions should match.
4-28
Platen
Figure 4-39. Platen Gap
Carriage Guide
Shaft Lever (Left)
Figure 4-40. Carriage Guide Shaft Lever Movement
Clockwise rotation widens gap.
Counterclockwise rotation narrows gap.
Clockwise rotation narrows gap.
Counterclockwise rotation widens the gap.
Figure 4-41. Platen Gap Adjustment Position
0.45 ± 0.01mm
Printhead
Adjust Lever
\
2
Frame (Left Side)
the platen. The
3
REV.-A
LQ-510