Adjustment
Table 4-3. Selecting the Best-Aligned Test Pattern
5.
Press the ON LINE button to print the pattern you select.
6.
Check the alignment of the printed pattern. If it is not satisfactory, return to
step 4.
7.
To set VR1 for the best-aligned pattern, turn VRl until the buzzer sounds.
8.
Turn off the printer.
LQ mode
The LQ mode adjustment is similar to the draft mode adjustment described above.
1.
Turn on the printer while holding down the ON LINE, FORM FEED, and
LINE FEED buttons.
2.
Press the ON LINE button.
4-8
LQ-2OO/AP3000