Removing The Control Panel - Epson ActionPrinter 3000 LQ-200 Service Manual

Disassembly and Assembly

Removing the control panel

1. Remove the upper case as described earlier in this chapter.
2. Turn the upper case upside down and push in the two notches that secure the
control panel to the upper case. Then remove the control panel from the
upper case.
When you install and remove the control panel, be careful not to damage the
FFC on the control panel with the FFC guide on the upper case.
3-10
CAUTION
Figure 3-4. Removing the Control Panel
LQ-2OO/AP3000