Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Globalsat SD-501
Summary of Contents for Globalsat SD-501
-
Page 1: User Manual
User Manual SDIO GPS Receiver SD-501 Version 1.3... - Page 2 SD-501 at a glance...
- Page 3 Some wireless device like Bluetooth device or WiFi device may affect the performance of GPS receiver. You may use the booster to improve acquisition sensitivity.
- Page 4 1. Introduction The SD-501 is a GPS receiver with SDIO interface and built-in active antenna for high sensitivity to tracking signal. Based on the SiRF star Ⅱe/LP low power chip set and supports all functions (SingleSat updates in reduced visibility, Superior urban canyon performance, FoliageLock for weak signal tracking, etc.).
-
Page 5: Led Function
1.3 LED Function GPS Status LED (Red): Blinking ---- GPS position is fixed Steady light ---- GPS position not fixed 1.4 Compatible Device Acer n30 Pocket PC Dell Axim X3 Pocket PC Dell Axim X30 Pocket PC HP iPAQ rz1710 series Pocket PC HP iPAQ h1930 series Pocket PC HP iPAQ h1940 series Pocket PC HP iPAQ h2210 series Pocket PC... -
Page 6: Install Driver
2. Install Driver For PDA which built-in SDIO (Example: iPAQ 1940) Please make sure the ActiveSync has been installed and your PDA is connected to PC 1. Put the CD with driver into CD Rom, the CD would run automatically, and then you can see the screen as below 2. - Page 7 3. You can move to Remove Programs under Settings, to make sure the driver (GloblSatSDGPS) has been installed.
- Page 8 3. How to test your SDIO GPS Receiver? The testing program only supports the Microsoft Windows CE & Pocket PC based PDA platform. 1. Put the CD with driver into CD-Rom, the CD would run automatically, and then you can see the screen as below 2.
- Page 9 2. Run the “ GPS Information” program from “ Start → Program files” of PDA. Here is the description of “ GPS Information” testing program as follows: User must select COM port , Baud Rate (4800) and click the [Star GPS] button to start receiving GPS data.
-
Page 10: System Specification
4. System Specification Electrical Characteristics (Receiver) Electrical Characteristics (Receiver) Frequency L1, 1575.42 MHz C/A Code 1.023 MHz chip rate Channels 12 channel all-in-view tracking Accuracy Position Horizontal 10 meters, 2D RMS 1-5 meters 2D RMS, WAAS corrected Velocity 0.1m/sec Time 1 micro-second synchronized to GPS time Datum Datum... - Page 11 4.2 Set up the format and COM port 1. TomTom Navigator Plug in SD-501 first, and then select the format “NMEA 0183v2 4800” and the COM port “SDGPS”...
Need help?
Do you have a question about the SD-501 and is the answer not in the manual?
Questions and answers