1. Manuals
  2. Brands
  3. Globalsat Manuals
  4. GPS
  5. SD-501
  6. User manual

Globalsat SD-501 User Manual

Sdio gps receiver
Hide thumbs Also See for SD-501:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual

User Manual

SDIO GPS Receiver
SD-501
Version 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SD-501 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Globalsat SD-501

Summary of Contents for Globalsat SD-501

  • Page 1: User Manual

    User Manual SDIO GPS Receiver SD-501 Version 1.0...
  • Page 2 SD-501 at a glance...
  • Page 3 Some wireless device like Bluetooth device or WiFi device may affect the performance of GPS receiver. You may use the booster to improve acquisition sensitivity.
  • Page 4 1. Introduction The SD-501 is a GPS receiver with SDIO interface and built-in active antenna for high sensitivity to tracking signal. Based on the SiRF star Ⅱe/LP low power chip set and supports all functions (SingleSat updates in reduced visibility, Superior urban canyon performance, FoliageLock for weak signal tracking, etc.).

  • Page 5: Led Function

    HP iPAQ h5550 series Pocket PC O2 XdaII Windows Mobile 2003 for Pocket PC, phone edition PS. Devices above have been tested and compatible with SD-501.Basically, if the WinCE Device with SDIO port and adopt the Bsquare SDIO NOW! would be compatible.

  • Page 6: Install Driver

    Please make sure the ActiveSync has been installed and your PDA is connected to PC 1. Put the CD with driver into CD Rom, the CD would run automatically, and then you can see the screen as below 2. Select “ SD-501 Driver for WinCE” to install the driver...
  • Page 7 3. You can move to Remove Programs under Settings, to make sure the driver (GloblSatSDGPS) has been installed.
  • Page 8 1. Put the CD with driver into CD-Rom, the CD would run automatically, and then you can see the screen as below 2. Click the “ GPS information” to execute the installation procedure of testing program (via PC and ActiveSync).
  • Page 9 2. Run the “ GPS Information” program from “ Start → Program files” of PDA. Here is the description of “ GPS Information” testing program as follows: User must select COM port , Baud Rate (4800) and click the [Star GPS] button to start receiving GPS data.

  • Page 10: System Specification

    1.023 MHz chip rate 12 channel all-in-view tracking 10 meters, 2D RMS 1-5 meters 2D RMS, WAAS corrected 0.1m/sec Time 1 micro-second synchronized to GPS time Default: WGS-84 8 sec., average 38 sec., average 45 sec., average 0.1 sec. average...

Table of Contents