Performing Operations On A Retrieved Map; Performing Operations On A Displayed Map; Displaying Poi Information - Eclipse AVN5435 Owner's Manual

Basic operation

5. Performing operations on a retrieved map

When retrieving a map, either a map with a pinpoint search result or without a pinpoint search
result (vicinity) will be displayed. Information on POIs can be displayed from the map retrieved.

Performing operations on a displayed map

The following conditions are necessary to display a map from a pinpoint:
1 When entering a POI name in "Retrieving a map using a POI name"
2 When "Retrieving a map in the event of an emergency"
3 When "Retrieving a map using an intersection name"
4 When a corresponding POL is made available when "Retrieving a map using a freeway
exit/entrance name"
● When a search is made using a pinpoint
The following operations are enabled on a retrieved map.
■ Changing the position
Scroll to change the position.

■ Displaying POI information

The POI data displayed as per the conditions described in steps 1 to 4 above is shown.
Displaying POI information

Touch Info.
• Information on the POI is displayed
• Information on POIs can be displayed only when the method described in 1 to
4 above was used to call up a map.
• There may be no information available for some POIs.
60
.
● When a search cannot be made using a pinpoint