Adjusting Volume Balance - Eclipse AVN5435 Owner's Manual

Adjusting volume balance

The set position for front-to-back, right-to-left volume balance can be adjusted.

BAL
Touch
POSITION setting screen to
display the volume balance
adjustment screen.

Touch the screen at the preferred
balance point.
• To make fine adjustments, touch
, ,
CENTER
• Touching
volume balance to the center position.
• After making settings, touch
• The set volume balance will be saved
and the system will return to the
previous operation screen.
• To set the position again, touch
and repeat the steps above.
• Adjustments to volume balance and
position are saved separately.
Activating each position and then
displaying volume balance adjustment
screen will show the volume balance
for each position.
• This setting cannot be done at the same time as POS (position selector)
adjustment, described on the previous page.
• Touching and holding
adjust values in a continuous action. However, adjustment will lock when it
reaches the center value, and
continue adjustment.
FAD
on the
.
will set the
BACK
POS
,
,
.
, or while making fine adjustments will
, , or must be pressed again to
29