Memorizing Channels; Selecting A Preset Channel; Preset Scan; Displaying Information About The Current Broadcast On The Sub-Display - Eclipse AVN4430 Owner's Manual

Audio operations
How to use the XM satellite radio
3
Input a channel.
4
Touch
Select

Memorizing Channels

IMPORTANT
If the vehicle's battery is disconnected (for
repairs to the vehicle or for removing the
main unit), all channels in memory will be
lost. In such a case, set channels in memory
again.
1
Tune into the station to be memorized.
Touch the preset switch where you
2
want to memorize the station until you
hear a beep sound.
● The selected station will be memorized.
To set additional manually selected
stations for the remaining preset channels,
repeat this procedure for each preset
channel.
Subsequently, when listening to the
satellite radio you will be able to tune into
stations by touching the preset switch.
42
42
.
Selecting a preset
channel
Touch one of the touch switches, [1] to
1
[6], that appear on the PND display.
● The channel preset to the selected touch
switch is tuned.

Preset Scan

1
Touch
Preferences
2
Touch
Preset SCAN
● "SCAN" will be displayed and the stations
memorized for preset channels P1 to P6
will be called up in order and received for
five seconds each. To cancel the preset
scan, touch
Stop SCAN
Displaying information
about the current
broadcast on the sub-
display
When receiving
information about the current broadcast, such
as the channel number, channel, artist,
feature, song, and program title, can be
displayed with the PND disconnected.
1
Press the [TEXT] button.
● Information on the music being played will
be shown on the sub-display and switched
as follows.
channel No. channel name
feature song/program title
No. ...
.
.
.
an XM broadcast,
artist/
channel