DURKOPP ADLER 867 Service Instructions Manual page 14

2
10
1
Adjust the eccentric
The eccentric 3 has to be adjusted in such a way that the mark 4 points
to the upper left and that the eccentric slot 6 stands parallel to the
threaded pin 2.
–
Loosen the threaded pin 2 of the block 5.
–
Through the hole 1, turn the eccentric 3 in such a way that the
mark 4 points to the upper left and that the eccentric slot 6 stands
parallel to the threaded pin 2.
–
Tighten the threaded pin 2 of the block 5.
5 4 3
3 2
6