2.9
Stitch length limitation
3
26
2
1
Depending on the sewing equipment used, the stitch length setting has
to be limited to 6 or 9 mm.
–
Unscrew the screw 2 on the stitch length setting wheel.
–
Pull off the setting wheel 1.
–
Unscrew the threaded pin 4 and screw it into the corresponding
bore hole.
The bore holes are numbered showing the corresponding max.
stitch length.
–
Carry out the setting according to chapter 2.3.1 "Basic setting of
stitch adjustment".
–
Put setting wheel on again and tighten it with screw 2.
4