Page 1
Nokia Digital Pen (SU-27W) User Guide Issue 1 EN...
Page 2
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided "as is". Except as required by applicable law,...
Contents 1. Introduction ......4 Reset the pen ........11 Bluetooth wireless technology..4 3. Basic use......12 2. Getting started..... 5 Notepads..........12 Ink color and line thickness ..... 12 Chargers ........... 5 Create and manage notes....13 Open and close the USB cradle ..6 Create and send messages ....
I n t r o d u c t i o n 1. Introduction The Nokia Digital Pen allows you to write notes on compatible digital paper and transfer the notes to a compatible mobile device over a Bluetooth connection.
To use the pen with a compatible Nokia S60 or Series 80 mobile device, you must install the Nokia Digital Pen Suite software from the supplied CD-ROM to your mobile device. To use the pen with your PC or modify the pen settings, you must install the Logitech io2 Software from the CD-ROM to your PC.
G e t t i n g s t a r t e d For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. ■...
G e t t i n g s t a r t e d 3. To start charging, remove the pen cap, and insert the pen into the USB cradle so that the connectors on the pen are facing the connectors on the cradle. If you use a laptop PC that is not plugged into a wall outlet, charging the pen battery from the PC increases the...
G e t t i n g s t a r t e d 4. Plug the charger into a wall outlet, and connect the charger cable into the adapter. While the battery is charging, the battery indicator slowly flashes red, yellow, or green depending on the charge level of the battery.
Bluetooth passcode. You can set the pen to connect with your mobile device automatically when the pen is switched on. To do this in Nokia devices, change your paired device settings in the Bluetooth menu.
G e t t i n g s t a r t e d The Bluetooth connection between the digital pen and the compatible mobile device is active only when the pen sends notes to the mobile device. Pair from the pen 1.
G e t t i n g s t a r t e d 4. Insert a new cartridge into the pen, and gently press the cartridge tip against a supplied notepad to secure it in place. ■ Reset the pen To reset the pen if it stops functioning, although it is charged, take off the pen cap, and push the reset button with a paper clip.
Start using a new notepad of the same type only after you have finished the old notepad. When you run out of digital paper, you can buy it from authorized Nokia dealers. For details, see the Nokia Web site www.nokia-asia.com/support.
2 seconds. 6. To manage the notes in your mobile device, use the PenPAL and Penmail applications. Refer to the Nokia Digital Pen Suite guide that can be found on the CD-ROM delivered with the pen.
B a s i c u s e 1. Open a small notepad that was supplied with the pen. 2. Tap the New notepad box on the first page of the notepad. 3. Ensure that the Bluetooth feature is active in your mobile device and that the pen is connected to the device.
P C c o n n e c t i v i t y 4. PC connectivity ■ Install Logitech io2 Software To use the digital pen with your PC, you need to install the Logitech io2 Software from the supplied CD-ROM. The software can be used with the Microsoft Windows XP or 2000 operating system.
Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use.
C a r e a n d m a i n t e n a n c e 6. Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. •...