Table of Contents
Advertisement
14
Program for Automatic Switching OFF of One Cooking Zone
This function permits to set a timer from
automatic turning OFF of one cooking zone only.
Note: It is not possible to set this program for both the cooking
zones.
With the touch control switched ON press the timer keys
or
.
By pressing the key
By pressing the key
The displays of the cooking zones show " " (timer).
Then, within 10 seconds, set the cooking zone to be programmed
as indicated in the chapter " Power Ignition and Adjustment of a
Cooking Zone ".
The indicator light on the top right of the cooking zone display
lights up.
Then set the timer; press the timer keys
or reduce the value.
The indicator light on the bottom right of the timer display
lights up.
Now the program for automatic switching off is complete.
At the end of the countdown the cooking zone will switch off
automatically and an acoustic signal (beep) will sound (for one
minute only) and "
Press any button of the touch control to reset the timer.
Note: The program for automatic switch off can be cancelled
at any time by resetting the power level of the cooking zone
0
(power level "
").
1
0
the initial value is
.
99
the initial value is
00
" will flash on the timer display.
99
to
minutes for
.
or
to increase
Advertisement
Table of Contents
