Using The Area Shot Function; Importing Area Shot Data; Area Shot Screen Configuration - Eclipse E-iSERV CD3100 Operation Manual

Using the Area Shot function

How to operate the Area Shot function (U.S.A./CANADA only)
About the Area Shot function
Using the Area Shot function, route data retrieved from the ECLIPSE E-iSERV web site containing
maps to predetermined destinations and guidance information can be displayed on your main unit.

Importing Area Shot data

• Load the Area Shot data in the CD-R, which is downloaded from the E-iSERV (web site), to the
unit. For details of the operation, see 'Reading Area Shot data' in the Owner's Manual.
• After loading all Area Shot data following the above instructions, press and hold the [MUTE/Area
Shot] button for more than one second to activate the Area Shot function.
ATTENTION
• The main unit can only import fi les located in the root directory of the CD-R.
XXXXXXXX.ast
• Disc formats that may be used are as follows:
• CD-ROM (MODE1)
• CD-ROM (MODE2_FORM1)
* NOTE: CD-ROMs written in MODE2_FORM2 cannot be read.
• NOTE: The fi le names can be changed within 8 alphanumeric characters (space cannot
be used.)
Area Shot Screen Confi guration
By manually switching between Guidance Points, information for both previous and upcoming
Guidance Points can be verifi ed during guidance. Intersection street names and the direction of
turns are shown on the display in text and with arrows.
Guidance point No. :
1
Displays the next (previous) Guidance Point number, from starting point to destination point.
Distance :
2
Displays the distance between Guidance Points.
Text information :
3
Information about Guidance Points (heading, street names) is displayed as text.
Automatically generated filename
File extension