How To Operate The Area Shot Function (U.s.a./Canada Only) - Eclipse E-iSERV CD7100 Operation Manual

Using the Area Shot function

How to operate the Area Shot function (U.S.A./CANADA only)

About the Area Shot function
Using the Area Shot function, route data retrieved from the ECLIPSE E-iSERV web site containing
maps to predetermined destinations and guidance information can be displayed on your main unit.
Importing Area Shot data
• Load the Area Shot data in the USB memory or CD-R, which is downloaded from the E-iSERV
(web site), to the unit. For details of the operation, see 'Reading Area Shot data' in the Owner's
Manual.
• After loading all Area Shot data following the above instructions, press and hold the [MUTE/Area
Shot] button for more than one second to activate the Area Shot function.
• Press and hold the [MODE] button for more than one second to switch between the Town Map
and the Route Assist view.
ATTENTION
<When using a USB memory drive>
• Data downloaded from the E-iSERV (web site) should be saved to folders created in the USB
drive as shown below (NOTE: in order for the system to properly recognize and load Area Shot
data, the user must create and name their folders as shown in the diagram below).
ECLIPSE
AREA
• Files retrieved from the E-iSERV web site are given automatically generated fi lenames upon
download.
• All route map and guidance information etc. retrieved from the E-iSERV web site are stored in
these automatically generated fi les.
• In the USB music-playing mode, the E-iSERV data in the USB memory cannot be read.
• NOTE: The fi le names can be changed within 8 alphanumeric characters (space cannot be
used.)
<When using a CD-R>
• The main unit can only import fi les located in the root directory of the CD-R.
Must be created by user
Automatically generated filename
wn
XXXXXXXX
.t
File extension
XXXXXXXX
.ast
File extension