Charging Battery Pack - Casio IT-9000 Series User Manual

Charging Battery Pack

Use the separately sold AC adaptor (AD-S42120C-N5/AD-S42120B-N) for the power
supply of the Dual Battery Charger.
1. Plug the cord from the AC adaptor into the AC adaptor jack of the Dual Battery
Charger.
2. Plug the AC cord into a wall outlet.
3.Taking care that the battery pack is oriented correctly, insert it into the Dual Battery
Charger.
This causes the Charge Indicator LED to light in red, indicating that charging has
started.
Status of Charge Indicator LED
Off:
Red:
Red Flashing:
Green:
Green Flashing: Standby due to the surrounding temperature being beyond the
E-80
Not charging the battery pack.
Charging the battery pack.
Battery pack problem
Charging the battery pack is complete.
specifi ed temperature range (approximately 0°- 40°C). (charging
resumes when the temperature reaches the range)