Display Messages - Casio Exilim EX-FC200S User Manual

Display Messages

ALERT
Battery is low.
Cannot find the file.
Cannot register any
more files.
Card ERROR
Check connections!
File could not be
saved because
battery is low.
Folder cannot be
created.
LENS ERROR
LENS ERROR 2
Load paper!
The camera's protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
Battery power is low.
The image you specified with the slideshow "Images"
setting cannot be found. Change the "Images" setting (page
113) and try again.
You are attempting to save a user BEST SHOT scene in
the "SCENE" folder when the folder already contains 999
user scenes.
1)There is something wrong with the memory card. Turn off the
camera, remove the memory card and then reload it into the
camera. If this message re-appears when you turn the
camera back on, format the memory card (page 164).
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a
computer or some other storage device.
2)Are you trying to use an Eye-Fi card? This camera does not
support use of an Eye-Fi card.
You are attempting to connect the camera to a printer while
the camera's USB settings are not compatible with the USB
system of the printer (page 129).
Battery power is low, so an image file could not be saved.
You are trying to record a file while there are already 9999
files stored in the 999th folder. If you want to record more,
delete files you no longer need (page 33).
This message appears and the camera turns off whenever
the lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
The Anti Shake unit of the camera may be malfunctioning.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
The printer ran out of paper while printing.
186
Appendix