Table of Contents
Advertisement
Connect the power cable to the AC connector on your touchmonitor. To
2
protect your equipment against risk of damage from electrical surges in the
power line, plug the touchmonitor's power cord into a surge protector, and
then connect the surge protector to a grounded (three-pronged) AC electrical
outlet.
Connect the touchscreen cable. Determine if you have RS-232 or USB.
3
Connect one end to the appropriate port on the back of your PC. Connect the
other end of the cable to the touchscreen connector on your touchmonitor.
The touchscreen cable connectors should fit snugly into the connectors on
your touchmonitor and PC.
2-7
Advertisement
Table of Contents
